14 oz white scrim vinyl is the most popular banner material. It is the least expensive and withstands wind, sun, and rain while showcasing bold, high-impact graphics. This material is the classic choice for most any regular banner need such as sports fields, fences, high school senior athletes banners, fence banners, gym banners, Church banners, and many other general banner needs. The material is strong and reliable, but can fail in windy or wet conditions. This material is the “work-horse” of vinyl materials and suitable for most banner needs and is the most commonly used vinyl material for banners.
Prints 1 side only. Grommets and hemming included in cost. Wind slits are available at an additional cost.
14 oz Vinyl Banner:
Width: 24" - 1800"
Height: 24" - 124"
Material: 13 oz White Scrim Vinyl
Color: 4/0
Gromets: None, 4 corners, top only, every 2' All Sides, Every 4' All Sides
Pole Pockets: No Pole Pockets, Top Only, Bottom Only, Top and Bottom, Left Only, Right Only, Left and Right, All Sides
Pole Pocket Size: 1", 1.5", 2", 3", 4"
Wind Slits: Available
• Create your file in CMYK mode with a resolution of 300dpi as EPS, TIF, PSD, & PDF files. For JPG files create the file to the closest size possible to the final print size or at minimum 50% scale with 300dpi.
• If you file has been created in RGB or includes RGB objects, convert your file to CMYK.
• Make file to size with no bleed or crop marks
• Large Format products are sent directly to press and there is no PDF proof option. We will not be responsible for any reprints if your file is sent in size ratio different than the specified size on your order.
• If you are working with vector images you can send any proportional size for your artwork. This is helpful when creating very large banners.
• Convert fonts to curves or outlines. We suggest you flatten or rasterized file if possible to minimize the file size.
Pole pockets
Pole pockets are made by folding an extra 3 inches of blank media towards the back side of the banner and sewing it together. Include a "safety zone" of 3" within your final size, along the sides of the pole pockets. Avoid any important text or logos in this area.
If you need a pole pocket for a pole thicker than 1" please indicated in the Special Instructions Box at the time of uploading your artwork.
Pole Pocket's Holding Grommets:
Holding grommets refer to our sliver nickel grommets placed on the edges right were the pole pocket starts. These grommets improve the strength of the pole pocket for heavier rods or poles. This option also gives the banner the option to be hanged by the grommets when poles are not available.
