Use for high-resolution graphics that must look gallery-grade even at arm’s length. A smooth surface produces razor-sharp text, gradients, and photographic detail for high-end graphics. The internal blockout layer prevents shadows or light from showing through. Excellent for any indoor or outdoor application.
The 18 oz construction is strong, resisting edge curl, tearing, and produces lasting color. Printed single-sided CMYK. Hemming is not needed. Standard grommets are at no additional cost, wind slits and Pole Pockets available.
Width: 12" - 120"
Height: 12" - 72"
Material: 18 oz Blockout
Color: 4/0
Gromets: None, 4 corners, top only, every 2' All Sides, Every 4' All Sides
Pole Pockets: No Pole Pockets, Top Only, Bottom Only, Top and Bottom, Left Only, Right Only, Left and Right, All Sides
Pole Pocket Size: 1", 1.5", 2", 3", 4"
Wind Slits: Available
• Create your file in CMYK mode with a resolution of 300dpi as EPS, TIF, PSD, & PDF files. For JPG files create the file to the closest size possible to the final print size or at minimum 50% scale with 300dpi.
• If you file has been created in RGB or includes RGB objects, convert your file to CMYK.
• Make file to size with no bleed or crop marks
• Large Format products are sent directly to press and there is no PDF proof option. We will not be responsible for any reprints if your file is sent in size ratio different than the specified size on your order.
• If you are working with vector images you can send any proportional size for your artwork. This is helpful when creating very large banners.
• Convert fonts to curves or outlines. We suggest you flatten or rasterized file if possible to minimize the file size.
Pole pockets
Pole pockets are made by folding an extra 3 inches of blank media towards the back side of the banner and sewing it together. Include a "safety zone" of 3" within your final size, along the sides of the pole pockets. Avoid any important text or logos in this area.
If you need a pole pocket for a pole thicker than 1" please indicated in the Special Instructions Box at the time of uploading your artwork.
Pole Pocket's Holding Grommets:
Holding grommets refer to our sliver nickel grommets placed on the edges right were the pole pocket starts. These grommets improve the strength of the pole pocket for heavier rods or poles. This option also gives the banner the option to be hanged by the grommets when poles are not available.
