10 oz coated polyester mesh banner is a lightweight, wind-friendly signage material designed for large outdoor graphics where a solid vinyl banner might balloon or tear. Because the open weave lets air, some light, and even sound pass through, these banners are popular for fence wraps on high school and college football stadiums, construction sites, buildings, concert stage backdrops, and crowd-control barricades. Their lighter weight makes them easier to transport and install in oversize panels, and the PVC coating delivers vivid, full-color printing that still appears solid from normal viewing distances.
The banner consists of a polyester scrim which gives this material strength, durability, and resistance to stretching or tearing. It weighs roughly 10 oz per square yard, noticeably lighter than our house 14 oz solid vinyl. Edges are usually sewn or heat-welded and reinforced with webbing and/or grommets as needed.
Max Width: 120"
Max Height: 72"
Print 4 color one side only
Grommet 4 corners, top only, every 2ft, every 3ft, or top corners only.
Hemmed
Option of Webbing for extra strength
Turnaround is 2 days. With webbing turnaround is 5-7 days.
• Create your file in CMYK mode with a resolution of 300dpi as EPS, TIF, PSD, & PDF files. For JPG files create the file to the closest size possible to the final print size or at minimum 50% scale with 300dpi.
• If you file has been created in RGB or includes RGB objects, convert your file to CMYK.
• Make file to size with no bleed or crop marks
• Large Format products are sent directly to press and there is no PDF proof option. We will not be responsible for any reprints if your file is sent in size ratio different than the specified size on your order.
• If you are working with vector images you can send any proportional size for your artwork. This is helpful when creating very large banners.
• Convert fonts to curves or outlines. We suggest you flatten or rasterized file if possible to minimize the file size.
Pole pockets
Pole pockets are made by folding an extra 3 inches of blank media towards the back side of the banner and sewing it together. Include a "safety zone" of 3" within your final size, along the sides of the pole pockets. Avoid any important text or logos in this area.
If you need a pole pocket for a pole thicker than 1" please indicated in the Special Instructions Box at the time of uploading your artwork.
Pole Pocket's Holding Grommets:
Holding grommets refer to our sliver nickel grommets placed on the edges right were the pole pocket starts. These grommets improve the strength of the pole pocket for heavier rods or poles. This option also gives the banner the option to be hanged by the grommets when poles are not available.
